1. Basic specifications specifications
模型
ZSW: heavy-duty vibrating feeder (Z vibration, S double-shaft, W grate type)
1142: trough width 1140mm, length 4200mm
Grid screen gap: 50-150mm (customizable, used for pre-screening of bulk materials) Maximum feed particle size: ≤600mm (within 1.5 times the grate gap)
Processing capacity: 200-600 tons/hour (related to material density and moisture content)
2.Power and vibration parameters
振动电机：
Model: YZD206 (2 units) Power: 2×7.5kW (380V,50Hz)
Exciting force: 2×60kN (adjustable eccentric block to adjust the amplitude)
Vibration frequency: 700-1000 times/ minute
Amplitude: 48mm (double amplitude)
3.结构设计
Trough material:
Mainboard: Q345B Steel plate(thickness 1216mm)
Grate bars: high manganese steel(Mn13Cr2) or wear-resistant alloy steel (lifespan 6-12 months) Vibration reduction device: rubber spring or composite spring (reduces basic load)
Inclination adjustment:0°-15° (hydraulic or manual adjustment to adapt to different working conditions)
4.Applicable materials
Mines: granite, iron ore, limestone and other raw ores
Preliminary screening of sand and gravel aggregates: uniform feeding +pre-screening before the crusher Others: coal mines, metallurgical slag and other block materials
5. Equipment size and weight Overall dimensions (length × width × height):
≈4800mm×1800mm×1500mm (including motor frame)
Machine weight: about 58 tons (depending on material and configuration)
6.Special configuration (optional)
Anti- blocking design:
Grate heating device (to prevent wet materials)
High-pressure water flushing system (for materials with high clay content)
智能控制：
Variable frequency speed regulation motor (automatically adjusts the feed amount according to the crusher load) Blockage alarm sensor (interlocked with the production line to shut down)
要点
1. Selection points:
For wet materials (water content > 10%), the grate gap needs to be increased or a vibrator needs to be added. For high-hardness ores (such as basalt), alloy steel grates are recommended.
2.安装要求：
The foundation level deviation is ≤2mm/m, and the pre-buried steel plate is used to prevent loosening. The discharge port and the crusher feed port should maintain a drop of 200-300mm.
