The main shaft of BS—K flotation machine is hung at one side of the frame.With a light structure,it* s easy to install the bearing body with a good perpendicularity.With cone-shaped cross section of the impeller and radiation—shaped stator,the machine is featured with wear resistance Jong service life and powerful agitating force. U—shaped tank reduces the ore accumulated at the bottom of the tank. With light main shaft parts and the stator installed at the bottom of the tank, it’s easy to install them.With small installed power,the machine is energy saving.With compressed air filled in,air bubbles disperse uniformly and the foam is stale.Thus,the suspension of mineral grains is good with a high recovery rate.
This product can be divided into several units, such as single tank, double tank, three tanks .four tanks, five tanks and six tanks,etc.Since this product has no ability of imbibing the ore pulp and air spontaneously,the flow of ore pulp needs terrace arrangement,and the return of foams depends on the foam pump.
While placing your order,in addition to specifying the model and quantity,make sure to provide the flotation circuit and the followings Configuration scheme and feeding mode
铲运机的数量和驱动方式（右驱动或左驱动）
Quantities of feeding chambersT intermediate chambers, and crude ore chambers
