1.基本规格
Model example: JC-1.0 (different manufacturers have different numbering rules)
Effective volume: 1m³ (including buffer space)
Processing capacity: 5-15t/h (adjusted according to concentrate density)
Design pressure: normal pressure (0.5~+5kPa)
2.结构参数
| 组成部分 | 规格 |
| Material | Q235B+NM400 wear-resistant lining plate (δ=68mm) |
| Discharge port size | DN200-DN300 (customizable) |
| valve type | Pneumatic/manual wear-resistant gate valve |
| Leg height | 800-1200mm (with maintenance space) |
3. Slurry adaptability
Maximum particle size: ≤5mm (recommended to use a slag removal screen) Viscosity range: ≤2000cP (high viscosity requires additional vibrator)
pH tolerance: 2-12 (corrosive media require 316L stainless steel)
4.Control and power Drive mode:
Electric actuator (0.75kW, IP65 protection) Optional pneumatic control (0.4-0.6MPa air source) Automation features:
PLC proportional distribution control (accuracy ±5%) Real-time monitoring of slurry flow (420mA signal output)
5 Equipment size
| 规范 | Typical values |
| Length×Width×Height | 1200×1000×1500mm |
| 重量 | 300-500kg |
6. Selection Recommendations
1. High wear conditions (such as iron ore concentrate):
Use Cr27 high chromium cast iron lining (lifespan increased by 2-3 times)
2. Corrosive media (such as copper concentrate): All 304/316L stainless steel (acid and alkali resistant)
3.维护点：
Check the wear of the lining every week
and clean the accumulated material at the discharge port every month
(Note: The actual selection requires the specific parameters such as the specific gravity of the concentrate and the particle size distribution)
