1.基本规格
Model example: KF-1.5 (different manufacturers have different numbering rules)
Effective volume: 1.5m³ (including buffer space)
Processing capacity: 30-80m³/h (pulp concentration 20-45%)
Design pressure: normal pressure (0.5~+5kPa)
2.Structural parameters
| 组成部分 | 规格 |
| Main body material | Q235B+NM360 wear-resistant lining plate (δ=8mm) |
| Number of allocation ports | 36 routes (customizable) |
| valve type | Pneumatic/Electric Wear resistant Gate Valve (DN80DN150) |
| Leg height | 800-1200mm (with maintenance space) |
3. Slurry adaptability
Maximum particle size: ≤5mm (recommended to use a slag removal screen) Viscosity range: ≤2000cP (high viscosity requires additional vibrator)
H tolerance: 2-12 (corrosive media require 316L stainless steel)
4.Control and power Drive mode:
Electric actuator (0.75kW, IP65 protection) Optional pneumatic control (0.4-0.6MPa air source) Automation features:
PLC proportional distribution control (accuracy ±5%) Real-time monitoring of slurry flow (420mA signal output)
5.Equipment size
| 规范 | Typical values |
| 外径 | Φ1200mm |
| Total height | 2500-3000mm |
| 重量 | 800-1200kg |
6. Selection recommendations
1. High wear conditions (such as iron ore):
Select Cr27 high chromium cast iron lining (lifespan increased by 3 times)
2. Corrosive slurry: All PP/PE material (acid and alkali resistant)
3.Maintenance points：
Check the liner wear weekly
and lubricate the valve transmission parts monthly
(Note: The actual selection requires the specific parameters such as slurry density and solid particle size distribution)
