1. Основные характеристики
The diameter of the large end of the crushing cone: ≈2000mm (the model “HCC200” usually represents the cone specifications) Maximum feed particle size: ≤250mm (≤200mm is recommended to ensure efficient crushing) Discharge opening adjustment
range: 15-50mm (hydraulic adjustment, support automatic control) Processing capacity: 200-600 tons/hour (adjusted according to material hardness, cavity type and discharge opening)
2. Power and drive
motor power: 160-250kW (common 220kW 6-pole motor, depending on the configuration) Spindle speed: 200-350r/min
(low speed and high torque design, suitable for hard rock crushing)
3. Core structure
Crushing cavity type: Standard type (medium crushing): used
for medium particle size output Short head type (fine crushing): used for finer finished products
(discharge 5-20mm) Hydraulic system: Iron protection (automatic discharge opening expansion when foreign matter passes) Cavity clearing function (hydraulic drive cone lifting and lowering, quick cleaning of blockages) Lubrication system: Intelligent temperature control circulation lubrication (oil pressure 0.10.3MPa, oil temperature ≤55℃)
4. Applicable materials
High hardness ore (such as granite, basalt, diabase, etc.,compressive strength ≤350MPa)
Construction aggregate, mine secondary/tertiary crushing
5. Equipment size and weight
Machine weight: ≈35-45 tons (including motor, hydraulic and lubrication system) Overall dimensions (length × width × height):
≈3.5m×2.8×3.2m (may vary depending on design)
6. Advanced features (optional)
Automatic control: PLC integration, real-time monitoring of spindle power, oil pressure, temperature, etc.
Support remote control. Wear-resistant parts material: ultra-high manganese steel (Mn22Cr3) or ceramic composite lining, life is extended30%-50%.
Environmentally friendly design: fully enclosed structure + pulse dust removal interface, noise ≤85dB.
Notes.
1.HCC200 different models may have differences in power and cavity design, so you need to check the specific model (such as HCC200H, HCC200C).
2. Actual production capacity: significantly affected by material properties (humidity, mud content), feeding uniformity and supporting equipment of the production line.
3. Maintenance focus: regularly check the oil quality of the lubrication system and the wear of the liner. It is recommended to replace wear parts every 8-12 months. If precise parameters are required (such as hydraulic system pressure value, motor brand, etc.), please provide application scenario (such as sand and gravel aggregate line, metal mine, etc.).
