1.Basic parameters
The diameter of the large end of the crushing cone: about 1000mm (the model “HCC100” usually indicates the cone specifications)
Maximum feed size: ≤160mm (≤120mm is recommended for best efficiency)
Discharge opening adjustment range: 10-30mm (hydraulic adjustment, adjustable according to crushing ratio requirements)
Processing capacity: 60-180 tons/hour (depending on material hardness, discharge port size and cavity Type Design)
2.Power System
Motor power: 75-110kW (90kW 4-pole motor is common, depending on the configuration)
Spindle speed: 400-600r/min (optimize crushing frequency and inertia balance)
3.Structure and design
Crushing chamber type: standard type (medium crushing) or short head type (fine crushing), different liner wheels are optional
Profile
Hydraulic system: integrated hydraulic cavity cleaning, iron overload protection and discharge port adjustment functions
Lubrication system: forced circulation lubrication (equipped with oil pump, cooler and filter)
4.Применяемые материалы
Ores with medium hardness or above (such as granite, basalt, iron ore, etc.)
Rock or recycled building materials with compressive strength ≤300MPa
5.Размер и вес оборудования
Machine weight: about 12-18 tons (including motor and hydraulic system)
Overall dimensions (length × width × height): about 2.5m × 1.8m × 2.2m (depending on the design difference)
6.Other Features
Automatic control: PLC system can be optionally equipped to monitor spindle load, oil temperature and other parameters in real time
Environmentally friendly design: low noise (≤85dB), sealed and dustproof structure Precautions
1.The HCC series parameters need to confirm the specific model suffix (such as HCC100C, HCC100H, etc.).
2.The actual production capacity is greatly affected by factors such as material humidity, mud content, and feeding uniformity.
3.Key wear-resistant parts (rolling mortar wall, crushing wall) are usually made of high manganese steel (Mn18Cr2)
Or composite alloy, the replacement cycle needs to be adjusted according to working conditions.
If more detailed motor model, hydraulic pressure value or electrical configuration is required, it is recommended to provide the manufacturer Business name or application scenario (such as mine, sand and gravel aggregate line, etc.).
