Type: large- angle corrugated sidewall belt conveyor
Applicable industries: coal, building materials, chemicals, grain, metallurgy, etc.
Conveyed materials: bulk materials (bulk density 0.5~2.5t/m³)
Working temperature: 19℃ ~ +40℃ (high-temperature materials require special conveyor belts)
2.Main technical parameters
paramètre
Data
Sidewall height
80mm/100mm/125mm (optional)
Transverse baffle space
126mm/252mm (optional)
Conveying capacity
19~172m ³/h (adjusted according to tilt angle)
Max. angle
90 ° (vertical conveying)
Belt speed
0.8 / 1.0 / 1.25 / 1.6 / 2.0 m/s
Motor Power
1.5~22kW (optional according to conveying capacity)
3.Structure design
Conveying belt;
Base belt: rubber belt (EP/NN material)
Sidewall: corrugated rubber skirt (anti-spillage)
Partition: T-type/TC-type (supporting materials)
Drive mode: electric drum or external reduction motor
Idlers: deep groove idler group(enhanced material stability)
4.Applicable working conditions
Ordinary materials: coal, ore, sand and gravel, etc.
Special materials: high temperature, acid, alkali, oil (special material conveyor belt is required)
Maximum particle size: ≤30%~40% of the height of the rib (to prevent overflow)
5. Selection recommendations
1. High-angle conveying (>45°): Use TC-type baffles to enhance material carry ability
2.High wear conditions (such as iron ore):
Use wear-resistant rubber belt + high chrome alloy roller.
3.Maintenance points:
Regularly check the vulcanized connection between the flange and the diaphragm (to prevent debonding)
Lubricate the drive components monthly (to extend service life)
If you need a complete performance curve or customized solution, please provide specific working conditions (such as material characteristics, conveying height, etc.).
