1.Analysis of core specifications
models
DZS: linear vibrating screen (D large/Z linear/S three-layer design) 1236: screen width 1200mm×length 3600mm
Screening area: single layer 4.32 (the total effective area of the three layers is about 12)
Processing capacity: Light materials (such as flour): 2-8 tons/hour Heavy materials (such as plastic particles): 5-15 tons/hour
Impurity removal accuracy: ≥95% (for foreign matter ≥0.3mm)
2.Vibration system
drive mode: dual vibration motor (self-synchronous technology)
Power: 2×0.75kW (explosion-proof optional)
Excitation force:2×12.5kN
Frequency: 1500 times/minute
Amplitude: 2-5mm (adjustable) Screen body inclination: 0°-8° electric adjustment
3.Screen configuration
Number of screening layers: standard 3 layers(customizable)
Upper layer: remove large impurities (aperture 3-10mm)
Middle layer: main screening (aperture 0.5-3mm)
Lower layer:fine material collection (aperture 0.1-0.5mm)
Screen material: 304/316L stainless steel woven mesh (food grade)
Nano nylon screen (anti-static,used for chemical powder)
4.Structural design
Main material: Carbon steel spray (standard)
All stainless steel (pharmaceutical GMP)
Sealing system:
Silicone airbag seal (dust leakage ≤ 1mg/m³)
Quick-detachable cleaning structure (complete machine cleaning within 30 minutes)
Anti-blocking design:
Bouncing ball cleaning system (68 per layer)
Ultrasonic screen cleaning device (optional, for ≤100 mesh screening)
5. Intelligent control
Human Machine Interface:
7-inch touch screen (records screening efficiency, alarm history)
Support RS485 communication (connect to MES system)
Safety protection:
Vibration overload protection (automatic power off)
Cover open stop interlock
6. Taille et poids de l'équipement
Overall dimensions: 3900×1500×1800mm (including receiving hopper)
Machine weight:
Carbon steel model: about 850kg
Stainless steel: about 1200kg
7. Special industry adaptation
Food Grade:
FDA approved
Can be equipped with metal detection and rejection device
Pharmaceutical Grade:
Comply with GMP requirements
Fully enclosed negative pressure design (anti-cross contamination)
configuration item Economy High allocation material Carbon steel spray coating 316L stainless steel Clearing method Bouncing ball Ultrasonic waves+bouncing ball Sealing grade IP54 IP65 (fully enclosed) Price range
Processing capacity: 12 tons/hour
Impurity removal rate: 99% (metal chips, black spots)
Maintenance instructions
1.Daily maintenance:
Clean the screen with an air gun after each use Check the aging of the seals every month
2.Replacement of consumables:
Screen: 36 months (depending on wear)
Rubber ball: Replace every year If need to obtain a trial machine report or FDA certification document for your specific material, please provide the material characteristics (such as bulk density, static electricity, etc.).
